Décor Designer MM
Linear LED outdoor egress with both emergency lighting and night lighting function. The MM series is designed to mount directly on mullion frames used in typical glass panel entrance structures, with vertical mounting surface as small as 2”. High ef ciency LEDs and full 90° cut-off provide uniform emergency and night lighting on the extended egress pathway. All models are outdoor rated, UL wet location, ADA compliant, and exceed requirements of UL Standard 924 and NFPA 101. Designed and manufactured in the USA, complies with Buy American requirements.
DOWNLOADS
SPECIFICATION INFORMATION
- Extruded aluminum lamp housing 2” diameter, with gasketed mount bracket only 2 ½” height that includes a waterproof compression seal for universal wall or top mount
- Available models include:
- Wet location listed, UL924 and certi ed IP66
- Gasketed, molded end caps and Sealed acrylic lens
- Stainless steel hardware
EM and AC: Single xtures powered from a Remote Power Supply
AC: 120/277 VAC input, with or without battery
- Self-Test/Self-Diagnostic operation is optional for EM models with the Remote Power Supply
- Line latch circuit prevents unwanted emergency activation at installation
- 10W NiCad battery standard
- 20W SLA battery standard, optional NiCad battery available
- Dual function available for emergency or normally -on operation
- EM Models provided with AC indicator and push to test switch
- Over 50,000 hour lamp life in normal use
- Lamps connected in parallel assure continued illumination, meeting NEC and NFPA requirements
- LED Color temperature standard 5000K;Optional outputs available 2900K, 3200K, 3800K
- 10W 1,000 Lumens
- 20W 2,000 Lumens
- Manufactured and tested to UL Standard 924, NFPA Life Safety Code 101, and certi ed to IP66
- Standard Operating Temperature
EM: -20° C to 40° C (-4° F to 104° F)
AC: -20° C to 40° C (-4° F to 104° F)
- Five year limited warranty
