Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 650 lumens. Has a durable painted steel construction in white finish. Provided with 2’ flex conduits on both ends. Compact design fits most fluorescent fixtures.


* When battery packs are remote mounted, the remote distance cannot exceed
1/2 of the distance from ballast to lamp specified by the A.C. ballast manufacturer.
The maximum allowable remote mounting distance is 50 feet.



  • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing
  • Internal so/id-state transfer switch automatically connects the internal battery to fluorescent lamp for minimum 90-minute emergency illumination
  • Fully automatic so/id-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours
  • Remote Mounting: Suitable for installation inside, on top or in remote* of the fixture
  • Can be used in both switched and unswitched fixtures
  • UL Listed for factory or field installation

  • Input Voltages: 120/277
  • Emergency Operation: 90 minutes
  • Initial Illumination: Provides a maximum initial lumen output of 650 lumens
  • Operating Temp: 0° to 50° C
  • Battery: 3.6V long life, maintenance-free, rechargeable sealed NiCd battery
  • Approval: UL Listed for damp locations

  • Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes

  • 5-year warranty against defects in material and workmanship (lamps excluded)

  • Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts
  • Operates one T5, T5HO, T8, T12, Circular T5/T9, U-bend TB/ T12 and 4-Pin long CFL lamp in emergency mode. Refer to the chart below for a complete list of compatible lamps

  • 9.5” x 2.375” x 1.5”