Tufflite TXP

Tufflite “TXP” Industrial Class 1 Division 2 emergency lighting units are designed for use in Class 1 Division 2, Groups A, B, C, D applications.

The rugged fiberglass NEMA 4X enclosure provides protection for the enclosed equipment against dust, dirt, fibers and dripping water. Class 1 locations are those in which flammable vapors and gasses may be present. Division 2 areas are defined as those areas in which ignitable concentrations of hazards are handled, processed or used, but which are normally in closed containers from which they can only escape through accidental rupture or breakdown of such containers or systems. Gases are grouped according to certain physical characteristics of their explosive behavior.



  • Designed and listed for use in Class 1 Division 2 Groups A, B, C, and D T2B area classification, also suitable for Class I Zone 2, IIA, IIB, IIC, and TI & T2 area classification
  • Rugged molded corrosion resistant fibre-glass housing is provided with stainless steel mounting feet, finished in industrial grey
  • A stainless steel breather valve is provided for efficient ventilation of the enclosure
  • Fully gasketed to meet the requirements of NEMA 4X applications
  • Hinged front access door for ease of maintenance access with stainless steel screws
  • External 4 hole mounting provision provides ease of installation with minimal cabinet intrusion

  • Fully automatic operation provides 90 minutes or more of emergency lighting
  • Premium, fully automatic current limited “Pulse Switching” charger provides ideal charge conditions for optimum battery performance and life
  • Choice of maintenance free sealed Lead Calcium or Nickel Cadmium batteries
  • Batteries recharge in 24 hours following a 90 minute discharge
  • Operating temperature range is 10°C to 40°C
  • Short Circuit battery protection
  • Field selectable 120 or 277 VAC input
  • Magnetic test switch and dual diagnostic LED indicator displays AC and Hi-Charge status
  • Brownout sensing assures emergency operation during periods of low line voltage Line-latch prevents unnecessary discharge of battery during installation, loads will not illuminate until after application of utility power
  • Low voltage cut-off prevents battery damage and ensures positive charge acceptance following an extended discharge
  • Self-Test / Self-Diagnostic monitoring available

  • Two fully adjustable, top mounted PAR 36 style lamp heads in high impact thermoplastic available with a variety of lamp types and wattage’s

  • Listed to UL 924, meets NFPA 101 Life Safety Code, NFPA 70-NEC and OSHA requirements

  • 3-year limited warranty